Interface; On/Off Switch - Scan Antenna Thuraya IP Product Manual And User Manual

Product Manual and User Guide – ThurayaIP Active Antenna

6. Interface

The antenna has the following interfaces:

6.1 ON/OFF switch

The ON/OFF switch is used to turn the antenna on and off.
However, it is only in use if the power source of the antenna is the battery, please see chapter
5 for power options. If the power comes from the charger or the DC-feeder, the antenna will
be on regardless of the position of the ON/OFF switch.
The primary purpose of the ON/OFF switch is to avoid battery discharge, if the antenna is not
being used.
Power Source
Battery only
Battery with charger
Charger only
DC feeder
DC feeder and
Charger
Version B
Switch in ON position
Antenna is ON
or Antenna is ON, battery is
being charged
Antenna is ON, battery is not
being charged
Not recommended
20. september 2010
SCAN Antenna A/S –
Switch in OFF position
Antenna is OFF
Antenna is ON, battery is
being charged
Antenna is ON, battery is
not being charged
Not recommended
www.scan-antenna.com
Page 10 of 19