Power Led / Charging Indicator; Charger Socket - Scan Antenna Thuraya IP Product Manual And User Manual

Product Manual and User Guide – ThurayaIP Active Antenna

6.2 Power LED / Charging indicator

The Power LED indicates that the antenna has power (is turned on). The LED indicates these
possible conditions:
OFF
Flashing Green
ON

6.3 Charger socket

Connect the charger here. The charger that comes with the antenna must be used. However, if
it becomes necessary to use a replacement charger, the charger must meet the following
specifications:
Output voltage:
Output current min. rating:
Connector:
Version B
The antenna receives no DC power, neither from battery, charger or
DC-feeder.
The battery is being charged. The antenna can be used while
charging. When the battery is fully charged, the flashing will be
replaced by a constant ON.
The antenna is turned on and is receiving DC power from the battery
or the charger (and the battery is fully charged) or the DC-feeder.
18 – 24 V DC
3 Amps
2.5 mm male plug
20. september 2010
SCAN Antenna A/S – www.scan-antenna.com
Page 11 of 19