Advertisement
Table of Contents
- 1 Installation/Maintenance/Use
- 2 Front Cover Removal
- 3 Mechanical Installation
- 4 Recessing Fans in the Wall
- 5 Surface Mounting Fans on Wall
- 6 Recessing Fans in Ceiling
- 7 Surface Mounting Fans on Ceiling
- 8 Electrical Installation
- 9 Optional Modules for Icon/Eco 230V
- 10 Troubleshooting Tip
- 11 Maintenance
- 12 Warranty
- 13 Range of Optional Modules
- Download this manual
Advertisement
Table of Contents
Related Manuals for Airflow iCON eco15
Summary of Contents for Airflow iCON eco15
- Page 1 Domestic AC Fans – 230V Installation and Operating Guide 230V AC Base Models: iCON eco15 – 72683501 iCON15 – 72591501 iCON30 – 72591601 iCON60 – 72591701...
-
Page 2: Installation/Maintenance/Use
The external opening should be covered by a suitable external grill, available separately from Airflow Developments Ltd. Airflow iCON / iCON eco Model Options 72683501 - eco15 -100mm Axial Fan with maximum capacity of 18.6 l/sec. -
Page 3: Front Cover Removal
Ensure free running of the fan impeller and that flexible duct connections are not over tightened to the fan outlet spigot. Airflow recommend that rigid ducting is used instead of flexible ducting, this will ensure maximum performance Front Cover Removal The front cover fan has a bayonet type fitting. -
Page 4: Recessing Fans In The Wall
Recessing Fans in the Wall The iCON 15 and iCON eco15 requires a 110mm diameter hole through the wall lined with a 100mm id (internal diameter) duct. The iCON30 requires a 110mm diameter hole through the wall, counter bored 160mm to a depth of 75mm. -
Page 5: Surface Mounting Fans On Ceiling
The iCON 15 and iCON eco15 requires a 110mm diameter hole through the ceiling. The fan should be fixed, with the screws provided, through the plaster board into the support. The iCON30 will require a 160mm diameter hole and the iCON60 a 190mm hole. -
Page 6: Electrical Installation
Electrical Installation All electrical installation to be carried out by an approved electrician in accordance with Part “P” U.K. Building Regulations and to the latest IEEE standards, or the appropriate regulations in the country of installation. iCON Domestic Fans require a 230V 50Hz supply, it is double insulated so therefore does not require an earth. -
Page 7: Troubleshooting Tip
Extended to 3 when registered @ airflow.com. Warranty only covers the fan, not the reinstallation of this if required. In the event of any defective parts being found, Airflow Developments Ltd reserve the right to repair or at our discretion replace without charge provided that the unit: 1. -
Page 8: Range Of Optional Modules
Web: airflow.de Fax: +44 (0) 1494 461073 Email: info@airflow.cz Email: info@airflow.com Web: airflow.cz Web: airflow.com AIRFLOW DEVELOPMENTS Limited reserve the right in the interest of continuous development to alter any or all specifications without prior notice. Page 8 of 8...