Table of Contents
Advertisement
82 Getting Connected
conversations as well as for listening to stereo music. Make sure that your
stereo headset also supports A2DP.
Just like when connecting to any Bluetooth device, you also need to enter
a passcode when connecting to a Bluetooth hands-free or stereo headset.
The passcode is fixed and cannot be changed on a Bluetooth headset.
Before you connect it with your phone, check for the proper passcode in the
manufacturer's documentation.
To connect a Bluetooth hands-free or stereo headset
1.
Make sure that both your phone and the Bluetooth headset are
turned on and within close range, and that the headset is visible.
Refer to the manufacturer's documentation to fi nd out how to set the
headset in visible mode.
2.
On the Home screen, click Start > Settings > Connections.
3.
Click Bluetooth > Menu > Devices.
4.
Click Menu > New. Your device searches for other Bluetooth-enabled
devices and displays them in the list.
5.
Select the name of the headset, and click Next.
6.
In Passcode, enter the alphanumeric passcode for the Bluetooth
headset, then click Next.
7.
Select the check box for the Hands Free service, and click Done.
Note
If the Bluetooth stereo headset becomes disconnected, turn the headset on
and repeat steps 1 to 3 above. Select the stereo headset and click Menu >
Set as Wireless Stereo.
Advertisement
Table of Contents
