Advertisement
Setting up the UndercoverEye™ Trekker MiniDVR
Step 1
Connect the RF antenna to the SMA antenna
connector as shown. The RF antenna is a tilt-
swivel antenna and should be pointed up when
installed. The Trekker case can be oriented in
any direction.
Step 2
Connect the video cable to the Trekker box as
shown. The connection is keyed. Once the
connection is made twist the cable end to make
a tight fit.
Step 3
The video cable fits most standard 12V video
camera. The cable comes complete with a
male 12V power connector (2.1mm barrel with
center positive), BNC video cable, and 3.5mm
MIC connector.
You can attach a microphone to record sound if
permitted using a standard microphone with a
3.5mm connector.
6
Advertisement
