Advertisement
Playing the UndercoverEye™ Trekker MiniDVR Video Files on your PC
Event Setup
The following setting MUST be setup as shown in order for the
Trekker MiniDVR unit to function properly. These settings will be
setup correctly leaving the factory; however, in the event of any
systems changes it's a good idea to verify these settings.
Alarm Input: Must be set to
Input Type: Must be set to
Alarm Output: Must be set to
Output Type: We don't care what this setting is
Motion Detection: Must be set to
To play the saved video files first remove the SD card from the
Trekker MiniDVR unit and place the card into the USB reader
as shown. Insert the USB reader into the USB slot of your PC.
Next, be sure to install the AK40H software on your PC. Follow
the instructions on the Trekker MiniDVR CD for installing the
AK40H software. The AK40H software will let you play back
the recorded video files and convert the video files to .AVI
format.
15
"On"
"Normally Open"
"Off"
"Off"
Advertisement
