Advertisement
OSD Menu
Press 'MENU' button on remote control to access to MiniDVR OSD
menu. Please refer the page above about how to use remote control
buttons. Password is '0000' as default. The password can be
changed on '[SUB MENU] [PASSWORD CHANGE]'.
In order to select cameras for recording, set recoding quality,
schedule recording times and to set other operation parameters, you
will need to access the MiniDVR's menu.
Numerals can be selected by pushing up/down button on remote
control.
Main Menu
In the main menu, the 'indicator
menu. Press 'UP/DOWN' button on remote control to select a desired
menu. After placing
'>'
on the desired menu and press 'ENTER'
button to enter the menu.
System Setup
Configure current time and 'DAY LIGHT SAVING' option. On
setting the current time, the field order should be as
follows;
2004/02/17 = year/month/day 19:44:32 = hour/minute/second
1. TIME SET > DAY LIGHT SAVING
SELECT 'ON" when you want to use day light saving time. You
can set up a time of period when day light
saving is applied.
2. LANGUAGE SETUP
English, French, Dutch, German, Spanish
3. VIDEO OUTPUT
Not selectable. Display NTSC or PAL according to unit's CCD
type.
4. BRIGHTNESS:
Select brightness value among low, medium and high .
N
Video Setup
Resolution:
Video Quality: Set as
"HIGH"
Frame Rate:
Set to
"30"
Pre-Recording: Must be set to
Post-Recording Time: Must be set to
Auto Recording: must be set to
14
'>'
will be shown on the left of each
for best recording quality.
for best recording quality.
"OFF"
"5 SEC"
"ON"
Advertisement
