Advertisement
Mounting the Wireless PIR Motion Sensor
To mount the Wireless PIR motion sensor first remove the
battery door and remove the AAA batteries. You will see 2
screw holes in which you can mount a small mounting plate or
screw it to the surface of the mounting area.
Try to keep the sensors at 2' to 3' from the ground if you want
to get the best detection of targets on the ground.
The range of the PIR detection is 40' to 80' depending on air
temperature and temperature of the target. The hotter the target
the longer detection range you will have. For example a car can
be seen at a greater distance.
The RF wireless range back to the DigitalEye unit is about 100'
to 150' depending on line of sight.
11
Advertisement
