Powering The Camera; Installing The Battery - Ricoh WG-4 GPS Operating Manual

Powering the Camera

Installing the Battery

1
Use the rechargeable lithium-ion battery D-LI92 that is provided with the camera.
Battery cover lock
Battery cover
1
Slide the battery cover lock as indicated by 1, and release the
lock.
2
Slide the release latch as indicated by 2, and open the battery
cover towards 3.
3
Using the side of the battery to push the battery lock lever in
the direction of 4, insert the battery with the PENTAX logo
pointing toward the lens.
Push the battery in until it is locked in place.
If the battery is incorrectly oriented, malfunction may result.
4
Close the battery cover, and slide the release latch in the
opposite direction indicated by 2.
Make sure that the yellow indicator cannot be seen and the cover is completely
closed.
32
Release latch
Battery
Battery lock lever