Ricoh WG-4 GPS Operating Manual page 231

Displaying the GPS Information Recorded on Captured Image
1
Press the Q button after shooting still pictures or
movies.
The camera enters
2
Press the 4 button until the Info 2 display appears.
If GPS information cannot be
obtained, "--" appears on the display.
*The date and time information is
displayed in GPS time (the reference
time scale of the GPS system). This
may be different from the time you
have set on the camera.
The image on which the GPS information is recorded can be imported
to a computer using the supplied software "MediaImpression 3.6.2 LE"
(for Windows) and the location where the image was taken can be
displayed on the map.
Select an image in the preview screen and click
[Property] area to display the map.
*To display the map, you need to connect your computer to the Internet.
Q
mode and an image appears on the display.
This part applies only to the RICOH WG-4 GPS camera
04 04/'14 04 04/'14 / / 4/'14
Edit Edit Edit
GPS latitude and
GPS time
longitude
(location) in the
100 - 0038 10 100 - 003
0038
3200 3200 3200
m m
700 hPa 700 hPa 700 hPa
180 180 180
06: 25: 00 06: 25: 00
N N 35 35 35 45' 52" 45' 52" 45' 52"
W W 139 139 139 41' 29" 41' 29" 41' 29"
8
229