ESC/VP21 Commands
Command List
When the power ON command is transmitted to the projector, the power
turns on and it enters warm-up mode. When the projector's power has
turned on, a colon ":" (3Ah) is returned.
When a command is input, the projector executes the command and
returns a ":", and then accepts the next command.
If the command being processed terminates abnormally, an error message is
output and a ":" is returned.
Item
Power ON/OFF
On
Off
Signal selection
Computer1
Computer2
Video
S-Video
USB Display
USB (EB-826WH/825H/824H/85H)
LAN (EB-826WH/825H/85H)
A/V Mute On/Off
On
Off
A/V Mute selection
Black
Blue
Command
PWR ON
PWR OFF
Auto
SOURCE 1F
RGB
SOURCE 11
Component
SOURCE 14
Auto
SOURCE 2F
RGB
SOURCE 21
Component
SOURCE 24
SOURCE 41
SOURCE 42
SOURCE 51
SOURCE 52
SOURCE 53
MUTE ON
MUTE OFF
MSEL 00
MSEL 01
Item
Logo
Add a Carriage Return (CR) code (0Dh) to the end of each command and
transmit.
Cable Layouts
Serial connection
• Connector shape: D-Sub 9-pin (male)
• Projector input port name: RS-232C
<At the projector>
<At the projector>
Signal Name
Function
GND
Signal wire ground
Command
MSEL 02
<At the computer>
(PC serial cable)
<At the computer>
104