Troubleshooting - Bunker Hill Security 95914 Owner's Manual & Safety Instructions

Inspection, Maintenance, and Cleaning
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
before inspection, maintenance, or cleaning.
1. BEFORE EACH USE, inspect the
general condition of the Camera.
Check for loose screws, misalignment
or binding of moving parts, cracked
or broken parts, damaged electrical
wiring, and any other condition
that may affect its safe operation.
If a problem occurs, have the problem
corrected before further use.
Do not use damaged equipment.

Troubleshooting

Problem
Camera does not work.
Poor image quality.
View undesirable.
Image on the television
is upside down.
REV 14d
Item 95914
TO PREVENT SERIOUS INJURY FROM ELECTRIC SHOCK:
Unplug the Power Adapter from its electrical outlet
Possible Causes
1. No power at outlet.
2. Cables not properly
connected.
Camera lens is dirty.
Camera out of adjustment.
Camera not mounted correctly.
For technical questions, please call 1-888-866-5797.
2. WEEKLY: Wipe off Camera Lens with
a soft, clean, moist cloth. Then dry.
Probable Solutions
1. Check power at outlet.
2. Check that all cables are
securely connected.
Clean Camera lens.
Adjust Camera up, down, left, and
right to obtain desired view.
Reposition camera mount to mounting holes
at the top rear of the camera (see page 8).
Page 9