Touchpad Button Board - HP Pavilion G4 Maintenance And Service Manual

TouchPad button board

Description
TouchPad button board (includes cable)
Before removing the TouchPad button board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
●
Optical drive (see
●
Hard drive (see
●
Keyboard (see
●
Top cover (see
Remove the TouchPad button board and cable:
1. Turn the top cover upside down, with the front toward you.
2. Release the ZIF connector to which the TouchPad LED board cable is connected, and then
disconnect the TouchPad LED board cable (1) from the TouchPad button board.
3. Release the tape (2) that secures the TouchPad button board cable to the top cover.
4. Lift the front edge of the TouchPad button board (3) until it is released from the clips built into
the top cover.
5. Remove the TouchPad button board (4) and cable.
54 Chapter 4 Removal and replacement procedures
Battery on page 38), and then remove the following components:
Optical drive on page
Hard drive on page 41)
Keyboard on page 46)
Top cover on page 49)
39)
Spare part number
639450-001