FCC STATEMENT The adapter has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
N T R O D U C T I O N Thank you for choosing LevelOne 10/100/1000Mbps Gigabit Ethernet Card for 32-bit PCI Bus- equipped personal computers. The 32-bit PCI 10/100/1000Mbps Gigabit Ethernet Card is ideal for speeding up data transfers for network servers and other computers, such as those used for video- conferencing, that send and/or receive large amounts of data.
N P A C K I N G A N D N S T A L L A T I O N This chapter provides unpacking and installation information for the LevelOne 32-bit PCI 10/100/1000Mbps Gigabit Ethernet Card. Unpacking...
4. Cover the computer’s chassis. 5. Switch computer power on. If the BIOS section of your computer’s boot program is Plug-and-Play compliant, then at power-up the BIOS will automatically configure any newly installed the Gigabit Ethernet Card. NOTE: Due to a fault in some Plug-n-Play BIOS programs, it happens occasionally that a newly installed adapter is assigned an Interrupt Number which is already assigned to another device.
Page 6
E C H N I C A L P E C I F I C A T I O N S General Standards IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3x Flow Control Protocol CSMA/CD Data Transfer Rate...