Disabling A Password; Change Outlet Name - BayTech RPC-2 Owner's Manual

RPC SERIES OWNER'S MANUAL
DETAILED OPERATION AND CONFIGURATION
________________________________________________________________________________

Disabling a Password

Change Outlet Name

34
typing CONFIG" from the RPC > prompt to
access the configuration menu. If you re-
enter the new password correctly, the RPC
returns to the main menu again, but you will
not get an "Error" message.
Circuit Breaker : On
1) . . . OUTLET 1
2) . . . OUTLET 2
3) . . . OUTLET 3
4) . . . OUTLET 4
5) . . . OUTLET 5
6) . . . OUTLET 6
RPC >
To disable a password, enter a carriage
return at the "Enter New Password"
prompt. Enter another carriage return at the
"Re-enter New Password" prompt.
Changing the new password to a carriage
return disables password protection
From the status menu's RPC > prompt, type
CONFIG. The following menu appears:
RPC > CONFIG
1) . . . Change Password
2) . . . Change Outlet Name
Enter Request:
: Off
: Off
: On
: Off
: Off
: Off