Assembly - Pelican Calcite Cartridge System Owner's Manual

Calcite Cartridge System

Assembly

Housing
Cover
Calcite
Cartridge
Housing
Figure 2
1. Unscrew the cover from the Filter Housing.
2. Place the Calcite Cartridge onto the Stand Pipe in the Filter Housing, ensuring the end labeled "Top
End Cap" is facing up.
3. Screw the cover onto the Filter Housing until hand-tight.
4. Screw the plastic Push-In Connectors into the inlet and outlet sides of the housing cover hand-
tight.
©
2011 Enviro Water Solutions, Inc.
3060 Performance Circle, Suite 2, DeLand, FL 32724
TOP END CAP
Calcite
Cartridge
Stand
Pipe
www. pelicanwater.com
(877) 849-1635
-Rev B
Page 7