System Requirements - Nds surgical imaging Dome Ex User Manual

System Requirements

All display systems require operating system Windows 7 (x86 or x64)
or Windows XP Service Pack 3 (x86 or x64).
IMPORTANT! Note the following:
• NVIDIA boards. Display configurations using the NVS295 board
require a DisplayPort-to-DVI adapter. Display configurations, except
for the Dome E3cHB DisplayPort unit, using Quadro 600, Quadro 2000,
or Quadro 4000 require a DisplayPort-to-DVI adapter for the second
display.
• Ten-bit display systems. Graphics boards cannot be mixed on 10-bit
display systems. Use multiple boards of the same type.
Display
Dome E2
Dome E2cHB
Dome E2
Dome E2cHB
Dome E3
Dome E3cHB
Dome E3cHB DisplayPort
†
Dome E4c
Dome E5
Dome E2
Dome E2cHB
Dome E3
Dome E3cHB DisplayPort
Dome E5
* NVS295 board x1 or x16.
† Refer to Dome E4c Display User's Guide for instructions.
Controller
*
NVS295
Quadro FX380 or
Quadro 2000D
Quadro 600,
Quadro 2000, or
Quadro 4000
System Requirements
• Intel or AMD multi-core
processor
• PCI Express x16 lane slot
• 50 MB hard disk space
• 512 MB RAM
• CD-ROM drive
• Power supply, 350 watts or
greater
• Auxiliary power cable with
standard 6-pin connector
(for Quadro 4000 only)
About the Display | 3