2u quad lcd video monitor with four 4" lcd video displays, eight composite video inputs (on bnc) with a/b switching, eight loop-through outputs (on bnc), and option for adding sdi inputs
Hd/sdi high-res video monitors with 4.3" high-resolution lcd video displays, selectable 16:9 or 4:3 aspect ratio, sdi or hd-sdi inputs and buffered/equalized outputs (on bnc), and sdi lock indication leds (16 pages)
2u triple lcd video monitor with analog inputs and loop-throughs, optional additional input sections, and optional sdi inputs and outputs with converted to analog output (22 pages)
Hdmon series multi-format high-definition lcd screen with osd controls, two hd/sd-sdi in and buffered out, dvi in, xga in, y/pb/pb in, composite in, s video in, tally, and remote pc control through ethernet or rs-232 ports (32 pages)
Description The RM-2440 is a color video monitor in a 2RU chassis containing four 4" (100mm) Active Matrix TFT LCD displays. Each LCD is back lit with a cold cathode fluorescent tube. The LCD’s are mounted in a rotatable cylinder, which allows the operator to rotate the display array ±55°...
Call PANORAMAdtv or your distributor for ordering details on any of the options available for the RM-2440. Units are designed to meet, at time of manufacture, all currently applicable product safety and EMC requirements, such as those of UL and CE.
40 degrees Celsius (104 degrees Fahrenheit), adjacent devices can be rack mounted (or stacked) in proximity to the RM-2440 unit. If the above temperature is exceeded, allow a 1RU (1.75”/25mm) space above and below the unit for air circulation.
Section 2: Operation Front Panel Features Please refer to Figure-2a on the following page to familiarize yourself with the front panel features of the RM-2440 unit. The following sections describe these features and are referenced, by number, to Figure-2a. LCD Video Display (1-4) View input video sources here.
Rear Panel Features Please refer to Figure-2b on the following page to familiarize yourself with the rear panel features of the RM-2440 unit. The following sections describe these features and are referenced, by letter, to Figure-2b. See Figure-2c on page 12 for a top view of the RM-2440 showing rear panel connector clearance dimensions.
RM-2440 User Manual P/N 821574 Rev-C Section 3 Technical Information Tally Control Connector Wiring NOTE: Wohler Technologies, Inc. PCB layout and schematic support documentation is available upon request. 31055 Huntwood Avenue Hayward, CA 94544 PANORAMAdtv Phone: (510) 870-0810 Fax: (510) 870-0811...
RM-2440 User Manual P/N 821574 Rev-C Section 3: Technical Information Tally Control Connector Wiring A front panel tally LED is associated with each LCD monitor. Interface is provided to the LEDs via the Tally Control Connector on the rear panel (Item E, page 10). Tri-color (RED, GREEN, and YELLOW) tally indications are possible by activating the red and green LED sections simultaneously.
Page 15
RM-2440 User Manual P/N 821574 Rev-C Section 3: Technical Information Tally Control Connector Wiring CHANNEL DRY CLOSURE USING INTERNAL POWER SOURCE (EITHER/OR BOTH LEDS ON IS OK, BOTH = YELLOW) DB25 MALE CHANNEL POSITIVE TRUE LOGIC DRIVE USING EXTERNAL POWER 5 - 12VDC...
Page 16
RM-2440 User Manual P/N 821574 Rev-C PANORAMAdtv Wohler Technologies, Inc. 31055 Huntwood Avenue 31055 Huntwood Avenue Hayward, CA 94544 Hayward, CA 94544 1-888-596-4537 Phone: (510) 870-0810 Fax: (510) 870-0811 Fax: (510) 870-0811 US Toll-Free: 1-888-596-4537 web: www.panoramadtv.com www.panoramadtv.com sales@panoramadtv.com e-mail: sales@panoramadtv.com...