Hd/sdi high-res video monitors with 4.3" high-resolution lcd video displays, selectable 16:9 or 4:3 aspect ratio, sdi or hd-sdi inputs and buffered/equalized outputs (on bnc), and sdi lock indication leds (16 pages)
2u triple lcd video monitor with analog inputs and loop-throughs, optional additional input sections, and optional sdi inputs and outputs with converted to analog output (22 pages)
2u quad lcd video monitor with four 4" lcd video displays, eight composite video inputs (on bnc) with a/b switching, eight loop-through outputs (on bnc), and option for adding sdi inputs (16 pages)
Hdmon series multi-format high-definition lcd screen with osd controls, two hd/sd-sdi in and buffered out, dvi in, xga in, y/pb/pb in, composite in, s video in, tally, and remote pc control through ethernet or rs-232 ports (32 pages)
MON2-3W MON2-3/6.8 3U Dual LCD Video Monitors Document P/N 821525 Rev-E User Manual CONTENTS Title and Contents ............... Important Safety Instructions and Introduction ......... Section 1: General Features and Specifications ... Description and Features .............. Applications, Specifications, and Options ........
Page 2
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat source such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Page 4
MON2-3/6.8 Front Panel Description The MON2-3/6.8 and MON2-3W are 3U rack size, dual LCD color video monitors. The MON2-3/6.8 features two standard format 6.8" (diagonal) LCD monitors, while the MON2-3W features two special wide format 7" (diagonal) LCD video monitors.
Page 5
The MON2-3W and MON2-3/6.8 are ideally suited for monitoring of multiple video feeds in VTR bays, mobile production vehicles, news and transmission control rooms, and duplication and post production applications. Designed and manufactured in the U.S., the MON2-3W and MON2-3/6.8 are backed by a strong warranty and a satisfaction guaranteed return policy.
Page 9
Contact PANORAMAdtv sales representative if there are any unexplained shortages. Power Requirements The MON2-3W and MON2-3/6.8 are equipped with a world standard power supply that is capable of operating on 90-264 VAC @ 50-60 Hz. Power consumption is 60 watts, maximum.
Page 10
Screen image parameters are adjustable by four manual controls (Item 3). 2a Mon2-3/6.8 LCD Video Monitor - Active matrix TFT, 6.8" diagonal (4:3 aspect ratio). 2a Mon2-3W LCD Video Monitor - Active Matrix TFT, 7" diagonal (4:3 or 16:9 aspect ratio). LCD Video Monitor Display Controls - Rotary Trim Pots Each LCD video monitor can be adjusted separately using these four image controls: •...
Page 12
Section 2: Operation MON2-3W and MON2-3/6.8 User Manual P/N 821525 Rev-E Rear Panel Features Please refer to Figure-2c on the following page to familiarize yourself with the rear panel features of the MON unit. The following sections describe these features and are referenced, by letter, to Figure-2c.
Page 14
Section 2: Operation MON2-3W and MON2-3/6.8 User Manual P/N 821525 Rev-E Rear Panel Features (Continued) H CVBS Out - BNC Female Connector (MSDI-4 SDI Option) This connector supplies an analog CVBS encoded signal derived from the SDI input. Automatic standards sensing is accomplished by detecting 525 or 625 line signals.
MON2-3W and MON2-3/6.8 User Manual P/N 821525 Rev-E Section 3 Technical Information Tally Control Wiring SDI (MSDI-4) Input Module Option Field Upgrading CVBS (MAV-1) Input Module Option Field Upgrading NOTE: PCB layout and schematic support documentation is available upon request.
Page 18
MON2-3W and MON2-3/6.8 User Manual P/N 821525 Rev-E Section 3: Technical Information Tally Control Connections A front panel dual-color Tally Indication LED is associated with each LCD display module. Interface is provided to the LEDs via the Tally Control Connector located on the chassis rear panel. The Tally Indicator LEDs are capable of displaying three colors;...
MON2-3W and MON2-3/6.8 User Manual P/N 821525 Rev-E Section 3: Technical Information SDI (MSDI-4) Input Option Field Upgrading This section explains the procedures for field upgrading your unit with the MSDI-4 (SDI) option. We advise you remove the MON2-3 from the mounting frame and work with the unit on a clean, well lighted work bench.
MON2-3W and MON2-3/6.8 User Manual P/N 821525 Rev-E Section 3: Technical Information CVBS (MAV-1) Input Option Field Upgrading This section explains the procedures for field upgrading your unit with additional composite video (CVBS) input module(s). We advise you remove the MON2-3 from the mounting frame and work with the unit on a clean, well lighted work bench.
Page 22
MON2-3W and MON2-3/6.8 User Manual P/N 821525 Rev-E PANORAMAdtv Wohler Technologies, Inc. 31055 Huntwood Avenue 31055 Huntwood Avenue Hayward, CA 94544 Hayward, CA 94544 1-888-596-4537 Phone: (510) 870-0810 Fax: (510) 870-0811 Fax: (510) 870-0811 US Toll-Free: 1-888-596-4537 web: www.panoramadtv.com www.panoramadtv.com sales@panoramadtv.com e-mail: sales@panoramadtv.com...