Tcp/Ip Settings; Lan Interface Setup - LevelOne WBR-6802 User Manual

Items
Disable WPS
Self-PIN Number
PIN Configuration
Push Button Configuration
3.5

TCP/IP Settings

3.5.1 LAN Interface Setup

To set up the configuration of LAN interface, private IP of your router LAN port and subnet mask
for your LAN segment.
Items
IP Address
Subnet Mask
Information
Mark to disable the WPS, and clear to enable.
If you use this device as a client, you can use this code
when trying to connect this device to other AP by using
the PIN method.
After the AP or router you share has fill in your self-pin
number and click the
at this moment you can click the
minutes to establish the connection.
You can simply click the
button) together with the AP or router you want share in 2
minutes for connection.
Information
The IP of your Router LAN port (default 192.168.1.1).
Subnet Mask of you LAN (default 255.255.255.0). All devices on the
network must have the same subnet mask to communicate on the
network.
27
button in this GUI page
button in 2
button (or the WPS