LevelOne WBR-6802 User Manual page 26

Items
Disable WPS
WPS Status
Self-PIN Number
Push Button
Configuration
Current Key Info
Client PIN
Number
*Please click on the Apply Changes button or the Reset button at the bottom to save/reset the configurations.
If you are under the Client mode, the interface is different.
Click Wireless > WPS in the menu links to display the screen as shown below.
In this page you can connect your device to other networks by using PIN or PBC methods
.
Information
Click this checkbox to undo WPS.
You cannot manually select the items here. The WPS Status will change
from "UnConfigured" to "Configured" after you enable WPS function and
setup a wireless security key for this device.
If you use this device as a client, you can use this code when trying to
connect this device to other AP by using the PIN method.
Push Button Communication (PBC) method uses a simple action of
pushing a button on both the AP and the new STA to reach the function
of easy setup WPS connection. You can simply click the
button in this GUI page or click the WPS button under the case of the
router. After click on the button, please run the client's WPS and push
the PBC button within 2 minutes.
This field displays the current key information you configured.
Personal Identification Number (PIN) method. Users have to fill in the
PIN code of enrollee device and click the
communication between the AP and the enrollee device. After click on
the button, please run the client's WPS and push the PIN button within 2
minutes.
26
button to make