Brother MFC-9330CDW Owner's Manual page 37

Wireless Network
Install the Drivers and Software
(Mac OS X v10.6.8, 10.7.x, 10.8.x)
17
Before you install
IMPORTANT
For Mac OS X v10.6.7 or lower users: upgrade to
Mac OS X v10.6.8, 10.7.x, 10.8.x. (For the latest
drivers and information for the Mac OS X you are
using, visit http://solutions.brother.com/.)
a
Make sure your machine is connected to an AC
power source and your Macintosh is ON. You
must be logged on with Administrator rights.
18
Install MFL-Pro Suite
a
Put the CD-ROM into your CD-ROM drive, and
then double-click the BROTHER icon on your
desktop.
b
Double-click the Start Here OSX icon. If
prompted, select your model.
c
Choose Wireless Network Connection, and
then click Next.
NOTE
If your wireless settings fail, the Wireless Device
Setup Wizard screen appears. Follow the
on-screen instructions to complete the wireless
configuration.
Macintosh
d
Choose your machine from the list, and then
click Next.
NOTE
• If there is more than one of the same model
connected on your network, the IP Address will
be displayed to help you identify the machine.
• You can find your machine's IP Address by
printing out the Network Configuration Report
(see Print the Network Configuration
Report on page 39).
e
The installation screens appear one after
another. If prompted, follow any on-screen
instructions.
IMPORTANT
DO NOT cancel any of the screens during the
installation. It may take a few minutes for the
installation to complete.
NOTE
If the Setup Network "Scan to" name screen
appears, follow the instructions below:
1) Enter a name for your Macintosh (up to
15 single-byte characters long).
2) Click Next. Go to f.
The name you enter will appear on the machine's
Touchscreen when you press the Scan button
and choose a scan option (for more information,
see Software User's Guide).
37