2. HARDWARE SETUP
2.5.2 Memory Installation
WARNING!
Make sure that you unplug your power supply when adding or
removing memory modules or other system components. Failure to do so may
cause severe damage to both your motherboard and expansion cards (see 3.3
Hardware Setup Procedure for more information).
Insert the module(s) as shown. Because the number of pins are different on either
side of the breaks, the module will only fit in the orientation shown. A 184-pin DDR
SDRAM DIMM has a single notch slightly to the right of center.
BERMUDA 184-Pin DDR DIMM Sockets
This motherboard supports three pairs of differential clock signals per DIMM.
10
Bermuda User's Manual