Configure The Switch For Mac-Based Authentication - HP 2600 Series Function Manual

Web and MAC Authentication for the Series 2600/2600-PWR and 2800 Switches

Configure the Switch for MAC-Based Authentication

Command
Configuration Level
aaa port-access mac-based addr-format
[no] aaa port-access mac-based [e] < port-list >
[addr-limit]
[addr-moves]
[auth-vid]
[logoff-period]
[max-requests]
[quiet-period]
[reauth-period]
[reauthenticate]
[server-timeout]
[unauth-vid]
Syntax: aaa port-access mac-based addr-format
<no-delimiter|single-dash|multi-dash|multi-colon>
Specifies the MAC address format to be used in the
RADIUS request message. This format must match the
format used to store the MAC addresses in the RADIUS
server. (Default: no-delimiter)
no-delimiter — specifies an aabbccddeeff format.
single-dash — specifies an aabbcc-ddeeff format.
multi-dash — specifies an aa-bb-cc-dd-ee-ff format.
multi-colon — specifies an aa:bb:cc:dd:ee:ff format.
Syntax: [no] aaa port-access mac-based [e] < port-list >
Enables MAC-based authentication on the specified
ports. Use the no form of the command to disable MAC-
based authentication on the specified ports.
Configuring MAC Authentication on the Switch
Page
3-23
3-23
3-24
3-24
3-24
3-24
3-24
3-25
3-25
3-25
3-25
3-25
3-23