Table of Contents
Advertisement
Current System Time
Use Browser Time
Use Internet Time
Time Protocol
Server IP Address
Time Zone
Automatically Update Interval
Click OK to save these settings.
3
.
7
.
7
M
a
n
a
g
e
m
e
3
.
7
.
7
M
a
n
a
g
e
m
e
This page allows you to manage the settings for access control, access list, port setup, and
SNMP setup.
Allow management from the
Internet
Disable PING from the Internet
Access List
Default Ports
n
t
n
t
Click Inquire Time to get the current time.
Select this option to use the browser time from the
remote administrator PC host as modem's system time.
Select to inquire time information from Time Server on
the Internet using assigned protocol.
Select a time protocol.
Type the IP address of the time server.
Select the time zone where the modem is located.
Select a time interval for updating from the NTP server.
Enable the checkbox to allow system administrators to
login from the Internet. There are several servers
provided by the system to allow you managing the
modem from Internet. Check the box(es) to specify.
Check the checkbox to reject all PING packets from the
Internet. For security issue, this function is enabled by default.
You could specify that the system administrator can only
login from a specific host or network defined in the list.
A maximum of three IPs/subnet masks is allowed.
List IP - Indicate an IP address allowed to login to the
modem.
Subnet Mask - Represent a subnet mask allowed to login
to the modem.
Check to use standard port numbers for the Telnet, FTP
and HTTP servers.
69
Vigor120 Series User's Guide
Advertisement
Table of Contents
