Advertisement
use)
Before positioned the light, ensure the stabilit y of the installation s ite. In
the reverse hanging installation, use two sets of M10 bolts with a professional
big hook, link the hanging screw hole on the bottom of the light, must be ensure
that the light will not fell down from support rack, through the support rack and
light hand use the safet y rope for auxiliary lifting handle to ensure safet y, to
prevent the light falling and sliding. Light in the installation, the bottom prohibit
pedestrians. Safet y rope regularl y checked whether there is wear and tear,
whether there is loose hook. The manufacturer does not take any responsibilit y if
the light falling because hanging installation is not stable.
1. Hook use only for light lifting.
2. Hook as a handle move the light to prohibit, carrying, please use the
handle.
V、Operation
1． DMX Address Code Setting
Every light should be set with DMX address code when you are using the
controller to control multi lights, it is used to receive the signal from the
controller.
Since the product uses "address code dial code" set the address code, so
each dial code corresponding to address values are as follows:
Dial code
Corresponding
Warning
1
2
3
1
2
4
Hook installation
4
5
6
8
16
32
6
7
8
9
64
128
256
Advertisement
