Chapter 4: Operation; Power - Elo TouchSystems Touch Solutions Tablet User Manual

Chapter 4: Operation

Power

To turn the tablet on and off, press the tablet power button once. When the tablet is installed
onto the docking station, then the tablet can also be turned on and off using the power button on
the docking station.
To gracefully shut down the tablet, follow the operating systems normal power off procedure. To
abruptly power off the tablet, press and hold either of the power button until the tablet shuts off.
In the event that your tablet does not respond and does not turn off via the power button, reset
the tablet by removing the battery.
A Power Status LED is provided on the tablet and docking station that functions according to
the following table:
The system consumes low power when in SLEEP and OFF modes. If long periods of non-use
are planned, turn off tablet to save power.
For detailed power consumption specifications, refer to technical specifications available on the
Elo website www.elotouch.com.
The maximum voltage, frequency and current for the Elo Tablet, are provided in the power
ratings table below:
Tablet
Putting your tablet to sleep:
Put the tablet to sleep using the Sleep option instead of shutting it down. You can also change
Windows' power saving options to have the tablet automatically sleep after it has not been used
for a set period of time.
Tablet/Dock status
OFF
SLEEP
ON
Operating Voltage
Range
100 - 240Vac
Operating Frequency
Range
50/60 Hz
LED status
OFF
BLINKING
ON
Operating Current
Range
0.15~0.35A
User Manual: Elo
SW602113 Rev C, Page 42 of 59
®
Tablet