Honeywell RTH6500WF Quick Start Manual page 2

1.12 Determine your heating/cooling system type
Important! Heating/cooling system type must be set so that your thermostat
operates properly and does not damage your system.
1.12a If you have a traditional system (natural gas forced air with A/C), your
thermostat is set up by default to control this system.
Go to Step 2 .
1.12b If your system is:
• Multistage equipment
• Any type of heat pump
• Hydronic
• Other
You MUST change the system type by setting system function 1.
See "Setting functions and options" in the User Guide.
Not sure of your heating/cooling system type?
Refer to FAQ on wifithermostat.com/support
1.13 Test your thermostat
Congratulations! Your thermostat is operational.
1.13a Press the System button to
change to heating or cooling
and begin operation.
Heating/cooling system not turning on?
Refer to User Guide or FAQ at
wifithermostat.com/support
1.13b For remote access to your
thermostat, continue to Step 2
2
Connect to your Wi-Fi network
2.1 Connect to your thermostat
2.1a Connect your wireless device to
your home network.
Any of these device types
will work:
• Tablet (recommended)
• Laptop (recommended)
• Smartphone
View the Wi-Fi Enrollment video
at wifithermostat.com/videos
2.1b Make sure the thermostat displays
Wi-Fi Setup.
2.1c On the wireless device (laptop,
tablet, smartphone), view the
list of available Wi-Fi networks.
2.1d Connect to the network called
NewThermostat_123456
(the number will vary).
Note:
If you are asked to specify a home,
public, or office network, select
Home Network.
2.2 Join your home network
2.2a Open your web browser to access
the Thermostat Wi-Fi Setup page.
The browser should automatically
direct you to the correct page; if it
does not, go to http://192.168.1.1
2.2b Find the name of your home network
on this page and select it.
Note: Some routers have enhanced
features such as guest networks; use
your home network.
2.2c Complete the instructions for joining
your Wi-Fi network and click on the
Connect button. (Depending on your
network setup, you may see an
instruction such as Enter Password
for your home network.)
Note:
If you did not correctly connect to
the thermostat, you may see your home
router page. If so, return to Step 2.1.
2.3 Make sure your thermostat is
connected
While the connection is in process, your
thermostat will flash Wait for up to 3 minutes.
When the connection is complete, the
display will show Wi-Fi Setup Connection
Success. The Wi-Fi signal strength will
appear in the top-right corner.
After about 60 seconds, the home screen
will appear and Register at Total Connect
will flash until Step 3 (registration) is
complete.
Note: If the thermostat displays Connection
Failure or continues to display Wi-Fi Setup,
confirm you correctly entered your home
network password in step 2.2c. If correct,
refer to the FAQ at wifithermostat.com/support
69-2720_A.indd 2
MCR33880
.
Getting Help
If you get stuck... At any point in
this process, restart the thermostat
by removing the thermostat from
the wallplate, wait for 10 seconds,
and snap it back into place.
.
Return to 2.1
Need more help? Find additional
information in the User Guide.
Thermostat Wi-Fi-Setup page
M33875
M33876
3
Register online for remote access
To view and set your Wi-Fi thermostat remotely,
you must have a Total Connect Comfort
account. Follow the instructions below.
View the Wi-Fi Thermostat Registration
video at wifithermostat.com/videos
3.1 Open the Total Connect Comfort
web site
Go to www.mytotalconnectcomfort.com
3.2 Login or create an account
If you have an account,
click Login
– or –
click Create An Account.
3.2a Follow the instructions on the
screen.
3.2b Check your email
from My Total Connect Comfort.
This may take several minutes.
Note: If you do not receive a response,
check your junk mailbox or use an
alternate e-mail address.
Follow activation instructions
3.2c
the email.
3.2d Log in.
3.3 Register your Wi-Fi thermostat
After you are logged in to your Total
Connect Comfort account, register
your thermostat.
3.3a Follow the instructions on
the screen. After adding
your thermostat location
you must enter your
thermostat's unique
identifiers:
• MAC ID
• MAC CRC
Note:
These IDs are listed on the
Thermostat ID Card included
in the thermostat package.
The IDs are not case sensitive.
3.3b Notice that when the thermostat
is successfully registered, the
Total Connect Comfort
registration screen will display
a SUCCESS message.
In the thermostat display,
HOLD
you will see Setup
Complete for about
90 seconds.
M33852
3.3c Also notice that your thermostat
displays its signal strength.
Congratulations! You're done.
You can now control your
thermostat from anywhere
through your tablet, laptop, or
smartphone.
Total Connect Comfort free app
is available for Apple
®
iPad and iPod touch
at iTunes ® or at Google Play
for all Android
GET IT ON
MERCURY NOTICE: Do not place your old thermostat in the trash if it contains
mercury in a sealed tube. Contact the Thermostat Recycling Corporation at
www.thermostat-recycle.org or 1-800-238-8192 for information on how and
where to properly and safely dispose of your old thermostat.
NOTICE: To avoid possible compressor damage, do not run air conditioner
if the outside temperature drops below 50°F (10°C).
Need more help? Visit wifithermostat.com or call 1-855-733-5465 for assistance before
returning the thermostat to the store.
for a response
in
Thermostat ID Card
Use the MAC ID and CRC ID to register
this product at mytotalconnectcomfort.com
Carte d'identification de thermostat
Utilisez l'identification MAC et l'identification CRC pour
enregistrer ce produit à mytotalconnectcomfort.com
Tarjeta de identificación del termostato
Utilice la identificación MAC y la identificación CRC para
inscribir este producto en mytotalconnectcomfort.com
® U.S. Registered Trademark.
© 2012 Honeywell International Inc.
69-2723EFS—01 M.S. 04-12
Printed in U.S.A.
MAC ID
® ®
iPhone ,
®
devices
®
™ devices.
Download on
iTunes
HONEYWELL MODEL:
MAC ID: MAC CRC:
69-2723EFS-01
MAC CRC
8/3/2012 3:43:56 PM