Duncan KTG-1 Tube Owner's Manual

Duncan KTG-1 Tube Owner's Manual

Guitar preamp

Advertisement

KTG-1 Tube
Guitar Preamp
Owners Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KTG-1 Tube and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Duncan KTG-1 Tube

  • Page 1 KTG-1 Tube Guitar Preamp Owners Manual...
  • Page 2: Specifications

    Caution To prevent electrical shock, do not operate this unit in wet or moist areas. There are no user - serviceable parts inside. (see, "Maintenance" and "Tube Chart" sections for user maintenance procedures.) Specifications 1 rack space, 2 channel, all vacuum tube Noise (referred to full output, 20 - 20Khz) preamplifier Input impedance - 1 meg...
  • Page 3 King Tone Generator Congratulations on your purchase of the Seymour Duncan Research KTG-1™ Tube Guitar Preamp. "KTG" stands for "King Tone Generator” ™ Each product in the KTG Series has been designed and built to generate great guitar sound, now and for years to come. Read this manual carefully to familiarize yourself with the features and operation of the KTG-1.
  • Page 4: Front Panel

    Adds 5 db boost to both channels. Front Panel The KTG- I Tube guitar preamp is designed to operate at the beginning of a rack system. It will generate a wide range of guitar sounds, from super clean to radical overdrive. The above front panel shows a basic set - up of clean and distorted rhythm and lead sounds.
  • Page 5: Using Effects

    Adds 8 db boost to Channel 2 Adds 8 db at 6 khz to Channel 2 Using the Gain Boost functions of the KTG- I will provide many distinct tone and gain settings. The Pull Boost on Channel One adds 6 db boost to both channels. The Pull Boost on Channel Two adds 8 db to Channel Two only.
  • Page 6 MIDI Using the KTG-1 with MIDI Equipment With the addition of a Duncan adapter cable (Model # 128017) and a programmable MIDI switching device such as the Scholz MIDI octopus, you can place functions of the KTG-1 under...
  • Page 7 How to use with a Duncan Programmable Footswitch The KTG - 1 Preamp was designed to work equally well for musicians with and without full MIDI controlled racks. If you aren't set up for MIDI, then the optional Programmable Footswitch will give you quick and easy stage access to 4 sounds.
  • Page 8: Maintenance

    Check footswitch - is it overriding the front panel selector? Check front panel Channel Switch - it must be in Channel I to enable the Programmable Footswitch to switch channels, please refer to section "How to use with a Duncan Programmable Footswitch.
  • Page 9 Seymour Duncan 5427 Hollister Avenue Santa Barbara, CA 93111 Tel: 805.964.9610 Fax: 805.964.9749 www.seymourduncan.com...

Table of Contents