Page 2
5. This product requires ventilation to operate properly. Do not block the fan Thank you for purchasing the Powerstage 200! Make sure to visit opening or the vents on the side of the chassis. Maintain at least 4” clearance on all SeymourDuncan.com for the most up to date info and sound samples.
Page 3
Note: This equipment has been tested and found to comply with the limits Seymour Duncan could void the user’s authority to operate this equipment. for a Class B digital device, pursuant to part 15 of the FCC rules. These limits...
Page 4
with motors such as compressors, refrigerators or air conditioners as this can Top Panel cause high levels of unwanted noise in your sound or dips in power as motors start up. 1. Level Control – controls the overall loudness of the amplifier. 2.
Page 5
Rear Panel 12. Input Jack (1/4” mono) – Plug your main audio signal in here. 13. Auxiliary Input Jack (1.35mm Stereo) – This input feeds the headphone amplifier only. Plug your music storage device in here. 14. Headphone Output Jack (1/4” Stereo) – Plug your headphones in here. 15.
Page 6
Protection Features PREAMP CLIP / STATUS INDICATOR This LED also serves multiple purposes, indicating the following. This amplifier has several features designed protect it under worst case conditions. • Preamp voltage clip warning – the LED will begin to light when the input signal POWER AMP CLIP / OVER-CURRENT / OVER-TEMPERATURE INDICATOR is 6dB below the level of clipping.
Page 7
Limited Warranty • Continuous Output Power without thermal shutdown Seymour Duncan offers the original purchaser a one-year limited warranty on • @ 120VAC/60Hz – 140W both labor and materials from the day this product is purchased. We will repair or •...
Page 8
Make sure to visit SeymourDuncan.com for the most up to date info and sound samples. ADDRESS CONTACT SOCIAL 5427 Hollister Ave. T - 805-964-9610 /seymourduncanpickups @seymourduncan Santa Barbara, CA 93111 F - 805-964-9749 @seymourduncanpickups /seymourduncanchannel seymourduncan.com RevB...
Need help?
Do you have a question about the POWERSTAGE 200 and is the answer not in the manual?
Questions and answers