HP ProLiant DL120 Specification page 7

QuickSpecs
Standard Features
System Fans System Fans System Fans System Fans
Required Cabling Required Cabling Required Cabling Required Cabling
OS Support OS Support OS Support OS Support
Rack Airflow Rack Airflow Rack Airflow Rack Airflow
Requirements Requirements Requirements Requirements
Rack Kit Rack Kit Rack Kit Rack Kit
3 dual rotor fans ship standard. 3 dual rotor fans total supported internally.
For required cabling information, refer to the Web site at:
http://h10010.www1.hp.com/wwpc/us/en/sm/WF05a/15351-15351-3328412-241644-241475-
3579703.html.
Windows Server 2003 (web, standard, and enterprise editions; standard and enterprise editions)
Microsoft Small Business Server 2003 R2
Microsoft Windows 2008
Red Hat Enterprise Linux
SUSE Linux Enterprise Server
NOTE: NOTE: NOTE: For more complete and up-to-date information of all supported OSes for ProLiants, certification NOTE:
information and how to buy server operating systems from HP please visit the OS product site at:
http://h18004.www1.hp.com/products/servers/software/OEM.html.
NOTE: NOTE: For an up-to-date listing of the latest software and drivers available for your server, please select NOTE: NOTE:
your server: http://h20000.www2.hp.com/bizsupport/TechSupport/Product.jsp?lang=en&cc=
us&taskId=135&prodTypeId=15351&prodCatId=241435
Rack 10000 series Cabinets Rack 10000 series Cabinets Rack 10000 series Cabinets Rack 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling
efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum
cooling, allowing these racks to be fully loaded with servers using the latest processors.
CAUTION: If a third-party rack is used, observe the following additional requirements to ensure CAUTION: CAUTION: CAUTION:
adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and rear doors, you must
allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit
adequate airflow (equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack must be
a minimum of 2.75 inches (7 cm).
CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This CAUTION: CAUTION: CAUTION:
arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling
that can lead to thermal damage.
NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation CD NOTE: NOTE: NOTE:
provided with the server, or to the server documentation located in the Support section at the following
URL: http://h18004.www1.hp.com/products/servers/proliantdl120/index.html.
The DL120 G5 Fixed Rail System supports installation in racks with square or round mounting holes
(including Compaq/HP 7000, 9000, 10000 and HP series), with an adjustment range of 24" - 36".
Installation into Telco 2 post, and 4 post, or threaded holes racks requires a 3rd party option kit. Go to:
www.racksolutions.com for more information.
DA - 13014 North America — Version 6 — August 11, 2008
HP ProLiant DL120 Generation 5 (G5) HP ProLiant DL120 Generation 5 (G5) HP ProLiant DL120 Generation 5 (G5) HP ProLiant DL120 Generation 5 (G5)
Page 7