Harman Kardon HK 3370 Features And Specifications page 2
Phono input, a/b speaker selection, tape monitor loop, high-current capability, ultrawide bandwidth subwoofer output
Hide thumbs
Also See for HK 3370:
- Service manual (123 pages) ,
- Owner's manual (18 pages) ,
- Bedienungsanleitung (18 pages)
Advertisement
HK 3370
STEREO RECEIVER
Specifications
• Continuous Average Power
(FTC): 70 watts x 2 @ 8 ohms
(20Hz – 20kHz, <0.07% THD,
both channels driven); High-
Current Capability: ±42 amps
• Tuner – Usable Sensitivity: IHF
1.12µV/13.5dBf; THD at 1kHz
with 100% Modulation: (Mono)
0.3%, (Stereo) 0.4%; FM Adjacent
Channel Selectivity: ±400kHz, 65dB;
Ultimate (Maximum) S/N Ratio
(measured at 1mV RF Input Level):
(Mono) 73dB, (Stereo) 72dB
• General – Dimensions (H x W x D):
6-1/8" x 17-3/8" x 16-5/16"
(156mm x 442mm x 415mm);
Weight: 24.6 lb (11.2kg)
[NOTE: Depth measurement includes
knobs, buttons and terminal connections;
height measurement includes feet and
chassis.] All features and specifications
are subject to change without notice.
Features
70W x 2 Into 8 Ohms,
20Hz – 20kHz at <0.07%
THD, Both Channels Driven
Simultaneously • High-Current
(±42 Amps) Capability
Amplifier • Ultrawide-Bandwidth
Amplifier Design • Five Audio
Inputs • High-Quality Phono
Input • Tape Monitor Loop •
Preamp Out/Main Amp Input
Jacks for Use With Outboard
Equalizers • Subwoofer
Output • Remote A/B Speaker
Switching • FM Stereo/FM/AM
Tuner With 30 Station
Presets and Direct-Access
Tuning • IR Remote Extension
Jacks • Harman Kardon
System Remote
250 Crossways Park Drive
Woodbury, NY 11797
800-422-8027 FAX 516-682-3523
www.harmankardon.com
Advertisement
