Related Manuals for Harman Kardon HK 3380
Summary of Contents for Harman Kardon HK 3380
- Page 1 Power for the Digital Revolution HK 3380 STEREO RECEIVER OWNER’S MANUAL SPEAKER 1 AUTO TUNED STEREO SPEAKER 2 ® ® PRESET PHONO VID 1 VID 2 VID 3 TAPE M.
-
Page 2: Table Of Contents
HK 3380 STEREO RECEIVER Introduction Safety Information Unpacking Front-Panel Controls Front-Panel Information Display Rear-Panel Connections Remote Control Functions Installation and Connections Operation Basic Operation Source Selection Tuner Operation Tape Recording Memory Backup Processor Reset Using the Remote Control Troubleshooting Guide Technical Specifications See trademark acknowledgements on page 18. -
Page 3: Introduction
While sophisticated systems are hard at work within the HK 3380 to make all of this happen, hookup and operation are simple. Color-keyed connections and a comprehensive remote control make the HK 3380 easy to use. -
Page 4: Safety Information
Do not obstruct the ventilation slots on the top of the unit, or place objects directly over them. Due to the weight of the HK 3380 and the heat generated by the amplifiers, there is the remote possibility that the rubber padding on the bottom of the unit’s feet may leave markings on certain... -
Page 5: Speaker
9 Tuning Button 1 System Power Control: Press this button to turn on the HK 3380; press it again to turn the unit off. The Power Indicator 2 above the switch will initially turn red as the HK 3380 performs a self-check, and it will change to blue when the unit is on and ready for use. - Page 6 @ Preset Scan: Press this button to automatically scan through the stations that have been programmed in the HK 3380’s memory. The tuner will play five sec- onds of each station before moving to the next preset station. To stop the scan when the desired station is heard, press the button again.
-
Page 7: Front-Panel Information Display
F Preset Indicator G Memory Indicator H Stereo Indicator indicate that you are hearing the signal the HK 3380 is receiving from the device connected to the Tape Monitor Inputs ¢. The dot to the left of the Input Indicator D for the last-selected source input will remain lit. -
Page 8: Rear-Panel Connections
Main In Jacks ⁄. ⁄ Main In: These jacks are the input to the HK 3380’s power amplifier. Unless an external power amplifier is used, the jumper pins should remain connected between these... - Page 9 HK 3380. ‹ Speaker 1 Terminals: Connect these terminals to the appropriate terminals on your speakers.
-
Page 10: Remote Control Functions
≈ Transmitter Window NOTES: • The function names shown here are each button’s feature when used with the HK 3380. Most buttons have additional functions when used with other devices. See page 16 for a list of these functions. • To make it easier to follow the instructions that refer... - Page 11 † Enter Button: This button has no function on the HK 3380, but may be used as the Enter key for a compatible Harman Kardon DVD Player or as the Random Play button for a compatible CD Player. (See page 16 for more information on using the remote to control other devices.)
-
Page 12: Installation And Connections
Monitor In Jacks ¢. Connect the Record/In jacks on the recorder to the Tape Monitor Out Jacks ∞ on the HK 3380. When the tape deck connected to these jacks is a three-head unit or has off-head play- back, it will be possible to monitor the output of the source being recorded. - Page 13 System and Power Connections The HK 3380 is designed for flexible use with external control components and power amplifiers. These con- nections are easy to make during an initial installation, or at a later date, should you choose to upgrade your system.
-
Page 14: Operation
Indicators A. Both speakers may be turned off for private headphone listening. • To program the HK 3380 for automatic turnoff , press the Sleep Button *©. Each press of the button will increase the time before shutdown, displayed by... -
Page 15: Tape Recording
Preset Tuning Up to 30 stations may be stored in the HK 3380’s memory for easy recall using the front-panel controls or the remote. To enter a station into the memory, first tune the station using the steps outlined above. Then: 1. -
Page 16: Using The Remote Control
OPERATION key. Device pages are selected by pressing the Source Selectors ç, which also changes the input source selection on the HK 3380. The Video 1, Video 2, Video 3, Tape Monitor/CDR and CD device pages are factory-programmed to operate compatible Harman Kardon products. -
Page 17: Troubleshooting Guide
Video source unit’s video ouput is properly connected, the source is turned on and the correct video input on the HK 3380 has been selected Video Monitor Output · is connected to a TV or video display, and that the TV is turned on and the... -
Page 18: Technical Specifications
All features and specifications are subject to change without notice. Harman Kardon and Power for the Digital Revolution are registered trademarks of Harman International Industries, Incorporated. TECHNICAL SPECIFICATIONS HK 3380 TECHNICAL SPECIFICATIONS FM Tuner Section Frequency Range Usable Sensitivity Signal-to-Noise Ratio... - Page 19 NOTES NOTES...
- Page 20 ® 250 Crossways Park Drive, Woodbury, New York 11797 www.harmankardon.com © 2003 Harman International Industries, Incorporated Part No. CQX1A880Z...
Need help?
Do you have a question about the HK 3380 and is the answer not in the manual?
Questions and answers