Download Print this page

JBL 4319 Quick Start Manual

12-inch, 3-way studio monitor

Advertisement

Quick Links

MODEL 4319
12-inch, 3-way studio monitor
0dB
max
min
MF
Thank YOu FOr ChOOsing This
PrODuCT
JBL
®
thank you for purchasing the JBL
monitor 4319.
For more than 60 years, JBL engineers have been
providing audio equipment for concert halls, recording
studios and movie theatres around the world, and
JBL products have become the hands-down choice
of leading recording artists and sound engineers. the
4319 is a new member of the family of JBL bookshelf
0dB
max
min
HF
®
three-way studio
quick-start guide
studio-monitor speakers that dates back to 1968
with the original model 4310 control monitor. to get
the best performance from your new studio monitor,
please read these instructions thoroughly.
1
www.jbl.com

Advertisement

loading

Summary of Contents for JBL 4319

  • Page 1 JBL products have become the hands-down choice of leading recording artists and sound engineers. the 4319 is a new member of the family of JBL bookshelf www.jbl.com...
  • Page 2: Package Contents

    The 4319 is designed so that a positive voltage at the “+” (red) terminal will cause the speaker drivers to move outward (toward the room). each JBL 4319 box contains one (1) JBL 4319 studio-monitor speaker. if you suspect that there has been shipping damage, report it immediately to We recommend using a high-quality speaker wire with polarity coding. the your dealer.
  • Page 3: Bi-Wire Connection

    Bi-Wire Connection IMPORTANT: Make sure that the (+) and (–) wires or pins do not touch the 4319 connection assembly has two sets of input terminals that are each other or the other terminal. touching wires can cause a short circuit connected by metal jumper bars. the upper set of terminals is for the that can damage your receiver or amplifier.
  • Page 4 If you’re bi-wiring with a single stereo power amplifier, connect the speakers according to the following illustration. Amplifier Right Left Mid/Tweeter Mid/Tweeter Connection Connection Woofer Woofer Connection Connection Right Left Speaker Speaker If you’re bi-wiring with two stereo power amplifiers, connect the speakers according to the following illustration. Amplifier 1 Right Left Right Left Mid/Tweeter Mid/Tweeter Connection Connection Woofer Amplifier 2...
  • Page 5: Caring For Your Speakers

    You can use these controls to adjust the speaker’s sound according to your room’s acoustics or your personal taste. The 0dB positions are indi- cated on the unit. as with most speakers, after you start playing the 4319 it will take the drivers’ suspensions several weeks to “break in” and achieve optimum performance. during this period, the balance among the woofer, midrange and tweeter may change, so we recommend that you adjust the midrange and tweeter controls accordingly.
  • Page 6 HarMaN consumer, inc. 8500 Balboa Boulevard, Northridge, CA 91329 USA © 2011 HarMaN international industries, incorporated. all rights reserved. JBL is a trademark of HarMaN international industries, incorporated, registered in the united states and/or other countries. Features, specifications and appearance are subject to change without notice. Part No. 443887-002 Rev.: B...