UNPaCkINg The sPeakeR CAUTION: The 4365 weighs 86.4kg (190 lb). To avoid personal injury or damage to floors or the speaker, we strongly recommend that at least two people unpack and move the speaker.
Page 3
Do not place the speakers in direct sunlight or in places where they will be exposed to other strong light. • The 4365 is not video-shielded and may distort or discolor the picture if placed close to some types of TVs. •...
Page 4
“–”. Additionally, the “+” terminals have red rings, while the “–” terminals have black rings. See the illustration below. We have designed the 4365 so that a positive voltage at the “+” (red) terminal will cause the speaker transducers to move outward (toward the room).
Page 5
Hole in Cap BI-WIRE CONNECTION: The 4365 connection assembly has two sets of input terminals that are connected by jumper wires. The upper set of terminals is for high-frequency/ultrahigh-frequency drivers, and the lower set of terminals is for the woofer.
“0dB.” As with most speakers, the 4365 has transducers whose suspensions will take several weeks to “break in” and achieve optimum performance. During this period, the balance between the woofer, HF and UHF drivers may change, so we recommend that you adjust the HF and UHF controls accordingly.