System Board - HP Compaq 2510p Maintenance And Service Manual

System board

Description
Equipped with Intel Core Duo U7700 (1.33-GHz) processor (533-MHz FSB and 2-MB L2 cache)
Equipped with Intel Core Duo U7600 (1.20-GHz) processor (533-MHz FSB and 2-MB L2 cache)
Equipped with Intel Core Duo U7500 (1.06-GHz) processor (533-MHz FSB and 2-MB L2 cache)
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Switch cover (see
d. Keyboard (see
e. Display assembly (see
f. Top cover (see
When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:
● SIM (see
●
Memory module (see
●
RTC battery (see
●
WLAN module (see
● WWAN module (see
●
Fan/heat sink assembly (see
●
PC Card assembly (see
● Modem module (see
Remove the system board:
1. Turn the computer upside down, with the rear panel toward you.
70 Chapter 4 Removal and replacement procedures
Battery on page
Hard drive on page
Optical drive on page
Switch cover on page
Keyboard on page
Display assembly on page
Top cover on page
SIM on page 42)
Memory module on page
RTC battery on page
WLAN module on page
WWAN module on page
Fan/heat sink assembly on page
PC Card assembly on page
Modem module on page
41).
52)
56)
57)
59)
62)
67)
45)
47)
48)
54)
76)
78)
Spare part number
464764-001
451720-001
451719-001
74)