Table of Contents
Advertisement
NOTE:
Wheel weights and tire chains must be used with
your snow blade for traction.
CAUTION: INSPECT THE AREA TO BE
WORKED CAREFULLY BEFORE
OPERATING THE SNOW BLADE.
AVOID PIPES, ROOTS, CURBS OR
OTHER HEAVY OBSTRUCTIONS.
Using the Snowblade
Prepare lawn tractor engine for cold weather using
instructions furnished with the lawn tractor.
Always begin with transmission in first (low) gear and
gradually increase speed as required.
DO NOT repeatedly push snow in the same direction
causing excessive build up with each successive pass.
To reduce icing on blade, allow lawn tractor and blade to
adjust to outdoor temperature before operating.
Lubrication Points
Lubricate the points shown in figure 23 for easier opera-
tion. Use the grease packet furnished with the snow
blade for lubrication of the lift handle rod and the lift
handle tube assemblies.
HANDLE TUBE
LUBRICATE
FIGURE 23
OPERATION
CUSTOMER RESPONSIBILITIES
LUBRICATE
CAUTION:
AVOID EXCEPTIONALLY STEEP
SLOPES OR DROP OFFS WHICH MAY
BE HIDDEN BY THE SNOW.
NEVER RUN THE SNOW BLADE INTO
HEAVY MATERIAL AT HIGH SPEED.
CAUTION: ALWAYS LOWER BLADE
TO GROUND BEFORE LEAVING
TRACTOR.
Maintenance
During the operating season, check all bolts, nuts and
hairpin cotters to be sure they are secure. For improved
snow removal performance, coat the blade with
automotive type paste wax.
12
KNOW THE TERRAIN.
Advertisement
Table of Contents
