Iv. Assembly - Pride Mobility Quantum 6000Z 3S Owner's Manual

Power Seat Option Installation
Your power chair may be equipped with the power seat op-
tion. While the seat itself may be any one of the styles offered
for this model, the way the seat base attaches to the power
base is different.
To install the power seat:
l. Place the seat plate interface bracket onto the actuator.
Seefigure 14.
2. Insert screws into the actuator and insert and tighten
the hardware.
3. Place seating system onto the seat plate and secure.
Quantum 6000Z Series
I V . A S S E M B L Y
www.quantumrehab.com
Figure 13. Controller Routed on a Contour Seat
SEAT PLATE INTERFACE BRACKET
ACTUATOR
Figure 14. Power Seat Actuator
25