CityCom CCR 526sw User Manual

Cryptoworks cas embedded common interface digital satellite receiver

Advertisement

INSTRUCTION ABOUT 'WEEE' SYMBOL
I/B parenthesis to offer information for user.
English
This marking shown on the product or its literature,
indicates that it should not be disposed with other
household wastes at the end of its working life.To
prevent possible harm to the environment or human
health from uncontrolled waste disposal, please
separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.
Hosehold users should contact either the retailer where they
purchased this product, or their local government office, for details of
where and how they can take this item for environmentally safe
recygling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract.This product should not be mixed
with othercommercial wastes for disposal.
German
Die Kennzeichnung auf dem Produkt bzw. auf der
dazugehörigen Literatur gibt an,dass es nach seiner
Lebensdauer nicht zusammen mit dem normalen
Haushaltsmüll entsorgt werden darf. Entsorgen Sie
dieses Gerät bitte getrennt von anderen Abfällen,
um der Umwelt bzw. der menschlichen Gesundheit
nicht durch unkontrollierte Müllbeseitigung zu schaden
.Recyceln Sie das Gerät, um die nachhaltige Wiederverwertung von
stofflichen Ressourcen zu fördern. Private Nutzer sollten den Händler,
bei dem das Produkt gekauft wurde, oder die zuständigen Behörden
kontaktieren, um in Erfahrung zu bringen,wie sie das Gerät auf
umweltfreundliche Weise recyceln können. Gewerbliche Nutzer sollten
sich an Ihren Lieferanten wenden und die Bedingungen des
Verkaufsvertrags konsultieren. Dieses produkt darf nicht zusammen
mit anderem Gewerbemüll entsorgt werden.
User's Manual
Common Interface Digital Satellite Receiver
CCR 526sw / CCR 526si
CryptoWorks CAS Embedded

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CCR 526sw and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for CityCom CCR 526sw

  • Page 1 Business users should contact their supplier and check the terms and Verkaufsvertrags konsultieren. Dieses produkt darf nicht zusammen conditions of the purchase contract.This product should not be mixed with othercommercial wastes for disposal. mit anderem Gewerbemüll entsorgt werden. CCR 526sw / CCR 526si...
  • Page 2: Table Of Contents

    Table of Contents Table of Contents 1. SAFETY PRECAUTIONS 2. GENERAL FEATURES 3. HOW TO CONNECT YOUR RECEIVER 4. HARDWARE DESCRIPTION 5. SYSTEM SET-UP 6. MENU OPERATION 7. UPGRADE BY SATELLITE 8. TROUBLE SHOOTING 9. TECHNICAL SPECIFICATIONS...
  • Page 3: Safety Precautions

    2. GENERAL FEATURES 1. SAFETY PRECAUTIONS - Fully MPEG-2 & DVB Compliant This receiver has been manufactured to satisfy the international - Smart card interface for the embedded CrptoWorks safety standards. - HDMI connector with upscaling (576p, 720p, 1080i) Please read the following recommended safety precautions carefully - HDMI cable included - Preprogrammed for ASTRA, Hotbird and Türksat - 2 Slots of Common Interface for Viaccess, Conax, CryptoWorks, Nagravision, Irdeto, SECA...
  • Page 4: How To Connect Your Receiver

    3. HOW TO CONNECT YOUR RECEIVER 5) CONNECTING EXTERNAL AUDIO HI-FI SYSTEM Please DO NOT plug in the main power supply cord until To connect any external Audio Hi-Fi system, the receiver has been provided with two you have finished all the connections. RCA connectors at the back of the receiver, marked with Audio L and R respectively to connect the left and right Audio.
  • Page 5: Hardware Description

    4. HARDWARE DESCRIPTION 4. A. FRONT PANEL 4. B. REAR PANEL 1) LNB IN : This port is to connect the coaxial cable from LNB of your Dish. The IF input is provided through this port and the input frequency range is 950�2150MHz. Also the voltage switching 13V and 18V is passed through this port.
  • Page 6 4. C. REMOTE CONTROL UNIT 1) POWER : This is used to switch the receiver to ON/STANDBY mode. 15) LAST : This key is used to return to the previous channel. LAST 2) MUTE : This key is used to toggle between normal and muted audio. 16) AUDIO : This key is used to select the soundtrack list for the current service AUDIO 0 ~ 9...
  • Page 7: System Set-Up

    5.SYSTEM SET-UP 5.A. Automatic channel search for a satellite 5. B. Manual channel search for a transponder You can automatically detect and save all TV and Radio channels You can automatically search and save all TV and Radio channels of of a satellite as follows : a transponder as follows : ■...
  • Page 8: Menu Operation

    6. MENU OPERATION 6.1.1.A. AUTOMATIC CHANNEL SEARCH The main menu is classified into several sub menus which will carry out the When you are in the satellite window (left side of this screen), you can add, delete or edit satellite various operation individually.
  • Page 9: Edit Channels

    6.1.1.B. MANUAL CHANNEL SEARCH In normal mode, you can edit each channel separately. You can add to the selected channel into the favorite list. When you are in the transponder window (right side of this screen), you can add, delete or edit And you can also delete, lock/unlock or rename each transponder information and also scan the selected transponder to find the channels.
  • Page 10 6.1.2.C. Delete channel – F3 key RF Channel : Select or change RF channel number when your receiver is Select channel that you want to delete using the “ up / down ” keys and the “ page up/ down ” keys. connected to TV by RF connector.
  • Page 11 6.1.3.C. Time Settings Timer No. : Number of timer. Enable : Enable or disable the timer. You can change the time of your receiver and also switch On time : Set the time when the receiver will be automatically turned on. on/off the timer function in this menu.
  • Page 12: Main Functions

    6.1.3.G. FACTORY DEFAULT This event is scrambled. This is to restore the factory set values in case the user has encountered some problems This channel is locked. after changing any new values of channel data and others which may be in error. This event includes the teletext.
  • Page 13: Channel Guide

    6.2.3. CHANNEL GUIDE Press “F1” key To go back to the previous page. Press “F2” key To go the default page. The default page number is “100” Press “GUIDE” key, and the following screen will be Press “F3” key To increase the page number by 100. displayed.It will give the titles of the current and next Press “F4”...
  • Page 14: Upgrade By Satellite

    When you press F2 key, channel list of Multifeed will be On the live TV screen or paused TV screen, you can magnify some region of TV screen. displayed. Press “F3” key, and the ZOOM box will be display. Select channel using the “up/down” keys and press “OK” You can use following keys.
  • Page 15: Upgrade By Satellite

    7. UPGRADE BY SATELLITE Do not switch off the Receiver during the data download! You can upgrade your receiver up to date, when the new software is available. Select “Receiver upgrade” in the “Receiver Settings” Menu to enter Software download. 1.D.
  • Page 16: Trouble Shooting

    9. TECHNICAL SPECIFICATIONS 8. TROUBLE SHOOTING Problem Solution About the Receiver 1. Power Supply Does not display LED on the - Connect the power cord to the power outlet : SMPS Type front panel or the receiver has no power. properly.
  • Page 17 5. Audio Decoder System Decoding : MPEG-1 ISO/IEC 11172-3 Layer I & II Audio Mode : Mono, Dual, Stereo, Joint Stereo Sampling Frequency : 32, 44.1, 48 KHz 6. Audio/Video Output : CVBS, RGB, Audio L/R TV SCART : CVBS, Audio L/R VCR SCART : CVBS, Audio L/R RCA Jack...

Table of Contents