Power Saving - Mitsubishi Electric MR-EX655W-N-A Operating Instructions Manual

Power Saving

An appropriate timing is selected for each compartment and the power-saving mode is performed automatically. With the
power saving operation, the temperature of the compartment is set a little higher while compartment operations are performed.
Power-saving is canceled for compartments with doors that are frequently opened and closed, as well as the compartments on the fast cooling setting,
1
Touch
2
Touch
corner of the icon lights up, and then the setting is fi nished.
As for the compartment in power saving mode,
If 30 seconds pass without any operations, the display turns off.
Check the power-saving condition.
When checking the power saving conditions of each compartment, touch
compartment and you can check the compartment in power-saving mode by the
Example: When the freezer compartment and the refrigerator compartment are in
power-saving mode (ECO level 2)
Display example
Compartment
display
ECO GUIDE
The ECO Level of the previous 24 hours is determined by factors such as the temperature settings of the
compartments and the frequency of opening and closing the doors, and is indicated by the number of
ECO level
ECO GUIDE
• The ECO Level is indicated in 4 levels from 0 to 3. (Eco-friendly use can save power and increase the ECO level.)
• The ECO Level is updated about once every hour. (If there is no change in the ECO Level, the number of the
• At the time of purchase, level 1 is displayed.
• The ECO GUIDE is displayed even when Energy Saving Mode is not set.
After a door is closed, the ECO GUIDE and the
When Energy Saving Mode is set, the compartment in power saving mode will light up.
*Even though Energy Saving Mode is set, the display does not light up if the compartment is not on the power-saving mode.
How can I increase the ECO level?
Set Energy Saving Mode
When the temperature inside the refrigerator is stable, the
power-saving operation is performed automatically. This is
not set initially.
Set Power Save Mode
Performs the power-saving operation by reducing refrigerating
capacity. This mode can be set for the ice making and versa
compartments.
Set the temperature relatively high
16
By setting the temperature of each compartment relatively high,
Set Energy Saving Mode (ECO MODE)
.
.
is displayed, the blue light at the top left
Level 0 Level 1
Pages 24 - 25
will be displayed.
lights up.
Level 2 Level 3
display light up for about 30 seconds (then they go off).
power consumption can be reduced. We also recommend setting
the versa compartment to Soft-Freezing.
Do not open the doors more than necessary,
and close them as soon as possible
If doors are opened frequently or are kept
open for a long time, cold air escapes from
the refrigerator and more power is consumed.
• Even when a door is open only slightly,
it can cause frost or condensation,
reduce the cooling performance, or
generate water drips.
Usable in all
compartments.
to switch the display area by
display.
lights up to indicate
the compartment in power-
saving mode.
marks.
* represents a blinking display (such
as when the doors are opened and
closed frequently or the surrounding
temperature of the refrigerator is hot).
mark does not change.)
g.
han necessary,
ossible
m
med.
tly,
on,
or