Advertisement
❏ Installation Hardware
(For Installation)
No.
Item
q
Trim Plate
w
Mounting Collar
e
Lock Cancel Plate
r
Mounting Bolt (5 mmø)
Tapping Screw
t
(5
ø x 16 mm)
mm
y
Hex. Nut (5
ø)
mm
u
Rear Support Strap
Round Head Screw
i
(5 mmø x 8 mm)
Flat-Head Screw
o
(5 mmø x 8 mm)
❏ Installation Hardware
(For Wiring )
No.
Item
Power Connector
!0
(ISO connector)
!1
Reverse Extension Cord
!2
Clip Connector
Note:
¡The number in parenthesis underneath each accessory
part name is the part number for maintenance and
service.
¡Accessories and their parts numbers are subject to
modification without prior notice due to improvements.
¡Mounting Collar w is mounted on the main unit at
shipment.
¡Use the supplied screws for installation exclusively. In
case of losing any of them, please order the specific
screw.
❏ Transportation Bracket Removal
Be sure to remove the transportation brackets before
use (installation). Use round head screws ( 5
Diagram
Qty.
mm) for installation.
Be careful not to lose these screws.
1
<YFC054C088ZA>
1
<YFX214C437ZA>
2
<YFX994C134ZA>
1
1
1
<ZZBISVD7001A>
❏ Before Installation
1
<YEFG044C002>
¡Do not press the panel forcefully.
2
¡Do not scratch the panel with fingernails or any hard
6
¡Do not bump the front panel.
<ZZBISVD6503>
Diagram
Qty.
1
1
1
<YEAJ012890>
(a
page 7)
Transportation Bracket
Round Head Screw (5
Caution
objects.
a
Failure to observe the above may damage or
break the glass on the surface of the touch panel.
4
ø x 8
mm
ø x 8 mm)
mm
5
CQ-VD6503W
Advertisement
