Activating The Electronic Locking Differential (Eld); Driving Off-Road With Truck And Utility Vehicles - Ford 2009 F-150 Owner's Manual

Hide thumbs Also See for 2009 F-150:
Table of Contents

Advertisement

Driving

Activating the electronic locking differential (ELD)

The ELD can be turned on by
pulling the knob on the 4WD control
toward you while the control is in
either 4H (4X4 High) or 4L (4X4
Low) mode.
Once the knob is pulled, the
light located on the control will
blink for approximately two seconds
and then it will remain solid.
Once the
light on the control
remains solid, both rear wheel axle shafts will be locked together
providing added traction.
If the
light blinks for 10 seconds, then turns off, one of the following
has occurred:
• The vehicle speed is too high.
• The left and right rear wheel speed difference is too high during an
engagement attempt.
• The system has malfunctioned and will be accompanied by a CHECK
4X4 message in the message center.
Note: If the ELD has difficulty disengaging, release the accelerator pedal
and turn the steering wheel in the opposite direction while rolling.

Driving off-road with truck and utility vehicles

4WD vehicles are specially equipped for driving on sand, snow, mud and
rough terrain and have operating characteristics that are somewhat
different from conventional vehicles, both on and off the road.
How your vehicle differs from other vehicles
Truck and utility vehicles can differ from some other vehicles. Your
vehicle may be higher to allow it to travel over rough terrain without
getting hung up or damaging underbody components.
The differences that make your vehicle so versatile also make it handle
differently than an ordinary passenger car.
Maintain steering wheel control at all times, especially in rough terrain.
Since sudden changes in terrain can result in abrupt steering wheel
motion, make sure you grip the steering wheel from the outside. Do not
grip the spokes.
302
2009 F-150 (f12)
Owners Guide, 2nd Printing
USA (fus)

Advertisement

Table of Contents
loading

Table of Contents