Table of Contents
Advertisement
2. Connector Instruction
The camera connectors are as below. Connect the power and the
Ethernet with the camera. About I/O setting, please refer to the chapter :
"I/O
Configuration" for details.
3. PoE (Power over Ethernet) (Optional)
Power over Ethernet (PoE) is a technology that integrates power into a
standard LAN infrastructure. It enables power to be provided to the network
device, such as an IP phone or a network camera, using the same cable as
that used for network connection. It eliminates the need for power outlets at
the camera location and enables easier application of uninterruptible power
supplies (UPS) to ensure 24 hours a day, 7 days a week operation.
802.3at, 30.0W PoE Switch is recommended
9
Advertisement
Table of Contents
