Table of Contents
Advertisement
5. To start patrol, select one group from the list, and press
move according to the patrol route and dwell time you had set. If you select
"All Point", the camera will go every preset point in sequence.
6. To edit a patrol group, select it from drop-down list and click "Edit". To delete
a patrol group, select it from drop-down list and press
• How to set up auto pan
3. Select stop time, focus mode, and pan speed. If you select manual focus,
remember to adjust the focus to clear when you set up that preset point. If you
select auto focus, we advise to set the stop time longer because the camera
needs some seconds to focus.
4. Press
to start auto-pan. Press
• Other setting
IPCAM cannot focus on the object nearer than focus distance. If you select
"3M" for focus distance, the image of those objects at 1M may not be clear.
2. PTZ Control: Under "Continuous" mode, when controlling the 4-direction
arrows, users can press and hold the button to let the camera lens move
smoothly. Under "Step by step" mode, when controlling the 4-direction arrows,
users can make a click on button to let the camera lens move one step.
3. Relay Out1: Tick the Relay out "ON" box to trigger the relay output for testing.
Tick "Off" to stop triggering.
1. Auto-pan function allows the camera to patrol
between two preset points. Select the start
and end preset points from drop-down list.
2. Select how long auto-pan lasts. If you select
"Always", the camera will keep auto-pan until
someone stops it manually.
to pause.
1. Focus Distance: The longer the distance is
between camera and the shot object, the longer
distance you should select.
21
. The camera will
.
Advertisement
Table of Contents
