Table of Contents
Advertisement
e. RTSP setting
If you have a media player that supports RTSP protocol, you can use it
to receive the video streaming from IP camera. The RTSP address can be
set for two streaming respectively. Please jump to Chapter
Setting". There're setting field for RTSP address of two streaming.
(i)
RTSP Server: enable or disable
(ii)
RTSP Authentication:
"Disable" means everyone who knows your camera IP Address
can link to your camera via RTSP. No username and password are
required.
Under "Basic" and "Digest" authentication mode, the camera asks
the user to give username and password before allows accessing.
The passwords are transmitted as clear text under basic mode, which
provides a lower level of security than under digest mode.
Make sure your media player supports the authentication schemes.
(iii) RTSP Port: setup port for RTSP transmitting (Default: 554)
(iv) RTSP Start and End Port: in RTSP mode, you may use TCP and UDP
for connecting. TCP connection uses RTSP Port (554). UDP connection
uses RTSP Start and End Port.
f. Multicast Setting (Based on the RTSP Server)
Multicast is a bandwidth conservation technology. This function
allows several user to share the same packet sent from IP camera. To
30
:"Video
Advertisement
Table of Contents
