Quincy Compressor QSD 65040-AB Instruction Manual page 54

Section VIII - Power$ync II
Press F3 at the Compressor Hourmeter Menu to access
three additional menus used to reset maintenance
hourmeters after service has been performed. To scroll
through these three reset menus, use the UP and DOWN
arrow keys.
RESET HOURMETER MENU 1
RESET FLUID FILTER HOURS
RESET FLUID HOURS
UP FOR NEXT MENU/DOWN FOR PREVIOUS MENU
Press F1 to reset the fluid filter hourmeter after
replacement.
A confirmation message will be displayed before the
hourmeter is actually reset.
PRESS F1 TO RESET FLUID FILTER HOURS
PRESS ENTER TO RETURN
If this is the correct hourmeter to reset, press F1
again. If this is not the hourmeter that needs to be
reset, press ENTER to return to the previous menu.
After pressing F1, another message confirms that the
hourmeter has been reset.
FLUID FILTER HOURS RESET TO 0
PRESS ENTER TO RETURN
Press ENTER to return to the Reset Hourmeter
Menu 1.
From the Reset Hourmeter Menu 1, press F2 to reset the
fluid hourmeter. A confirmation message will be
displayed before the hourmeter is actually reset.
PRESS F1 TO RESET FLUID HOURS
PRESS ENTER TO RETURN
If this is the correct hourmeter to reset, press F1
again. If this is not the hourmeter that needs to be
reset, press ENTER to return to the previous menu.
52
™
Operation
PRESS F1
PRESS F2
UP FOR NEXT MENU/DOWN FOR PREVIOUS MENU
From the Reset Hourmeter Menu 2, press F2 to reset the
inlet air filter hourmeter.
UP FOR NEXT MENU/DOWN FOR PREVIOUS MENU
Quincy Compressor
FLUID HOURS RESET TO 0
PRESS ENTER TO RETURN
Press ENTER to return to the Reset Hourmeter
Menu 1.
RESET HOURMETER MENU 2
RESET LINE FILTER HOURS
RESET INTAKE FILTER HOURS
From the Reset Hourmeter Menu 2, press F1 to
reset the line filter hourmeter. A confirmation
message will be displayed before the hourmeter is
actually reset.
PRESS F1 TO RESET AIR FILTER HOURS
PRESS ENTER TO RETURN
If this is the correct hourmeter to reset, press F1
again. If this is not the hourmeter that needs to be
reset, press ENTER to return to the previous menu.
AIR FILTER HOURS RESET TO 0
PRESS ENTER TO RETURN
Press ENTER to return to the Reset Hourmeter
Menu 2.
COMPRESSOR MAINTENANCE MENU 1
MAINTENANCE HOURMETERS
TIME AND DATE
To view or set time, date, and day of the week,
press F2. To scroll to another Maintenance Menu,
use the UP and DOWN arrow keys. To return to
the previous display, press ENTER.
®
- QSD™
PRESS F1
PRESS F2
PRESS F1
PRESS F2