Removal of HV battery
HV battery removal
WARNING:
・ Be sure to wear insulated gloves when handling high-voltage parts.
・ Even if the vehicle is shut off and the relay is off, be sure to remove the service plug
grip before performing any steps.
・ Power remains in the high voltage electrical system for 5 minutes even after the HV
battery pack is shut off because the circuit has a condenser.
・ Make sure that the tester reading is 0 V before touching any high-voltage terminals
which are not insulated.
1. Disconnect the cable form the auxiliary battery negative terminal.
2. Remove the service plug grip.
a) Remove the 2 clips, then open the
battery service hole cover.
b) Wear insulated gloves, and pull up
the service plug grip. Then, remove
the service plug grip.
c) Apply electrical tape to the socket
of the service plug grip to insulate
it.
HV battery
Clip
18
Rear seat