Precaution to be observed when dismantling the vehicle
WARNING:
・ Never assume that the RX400h is shut off simply because it is silent.
・ Assure that READY indicator is off.
・ After removing the service plug, wait 5 minutes before touching any of the
high-voltage connectors and terminals.
・ Before dismantling the high-voltage system, take measures such as wearing
insulated gloves and removing the service plug to prevent electrocution.
・ If either of the disabling steps above cannot be performed, proceed with caution as
there is no assurance that the high voltage electrical system, SRS, or fuel pump are
disabled.
・ Never cut, or open any orange high voltage power cables or high voltage
components.
・ Make sure that the tester reading is 0 V before touching any high-voltage terminals
which are not insulated.
Necessary items
N
Protective clothing (insulated gloves, rubber gloves, safety goggles, and safety
shoes).
N
Vinyl tape for insulation
N
Before wearing insulated the vehicle gloves, make sure that they are not cracked,
ruptured, torn, or damaged in any other way. Do not wear wet insulated gloves.
13