Removal Of Hv Battery - Lexus GS450h Dismantling Manual

Gwl10 series gasoline-electric hybrid synergy drive
Hide thumbs Also See for GS450h:
Table of Contents

Advertisement

Removal of HV battery

WARNING:
Be sure to wear insulated gloves when handling high-voltage
parts.
Even if the vehicle is shut off and the relays are off, be sure to
remove the service plug grip before performing any further
work.
Power remains in the high voltage electrical system for 10
minutes even after the HV battery pack is shut off because the
circuit has a condenser that stores power.
Make sure that the tester reading is 0 V before touching any
high-voltage terminals which are not insulated.
The SRS may remain powered for up to 90 seconds after the
vehicle is shut off or disabled. To prevent serious injury or
death from unintentional SRS deployment, avoid cutting the
SRS components.
1. SHUT OFF IGINITION (READY indicator
is off).
2. REMOVE LUGGAGE COMPARTMENT
FLOOR MAT.
3. REMOVE 12 VOLT AUXILIARY
BATTERY
(1) Remove the luggage compartment trim
cover LH.
(2) Disconnect the cable from the auxiliary
battery negative (-) terminal.
(3) Disconnect the cable from the auxiliary
battery positive (+) terminal.
(4) Remove the 12 Volt auxiliary battery.
18

Advertisement

Table of Contents
loading

Table of Contents