3 Remove rear floor board No. 3.
Remove the rear floor
board No. 3 as shown in
the illustration.
4 Disconnect battery negative terminal.
Disconnect the negative
terminal of the 12 V
auxiliary battery.
5 Remove the key from the key slot.
Then disconnect the negative (-)
terminal of the auxiliary battery and
remove the service plug.
a)
Slide up the lever of the
service plug. Remove the
service plug grip while
turning the lever to the
left.
b)
Insulate the service plug
socket with insulating
tape.
6 Remove deck trim cover rear.
Disconnect the 4 clips
shown in the illustration,
then remove the deck trim
cover rear.
Lever
19
Clip